Alder

Custom Jacket Board Grade Alder Hardwood Lumber

Clear Appearance
Clear Cutting Boards
Clear 1 Face cutting (C1F)
Download Print

Alder: Custom Jacket Board

Custom Jacket Board is an 83.3% Clear One Face product with a Jacket Board #1 back.

Custom Jacket Board is one of the clearest grades manufactured. It's basically a high yield narrow Superior product. It's well suited for door frames, furniture panels, cabinets, moulding, and other applications where the wider boards in Superior are not required.

Contact Sales For More Info

6'1" 7'1" 8'1" 8'3" 8'3" solid pack 10'1" 12'1"
4/4
5/4
Width Specs: 
  • 3.5" to 4.5" (89mm to 114mm)
  • With up to 5% narrows by volume
Length Specs: 
  • 6' (1.83m) minimum
Cutting Specs: 
  • Minimum cutting 3" x 3' (76mm x 914mm)
  • No limit to the number of cuttings allowed
Notes: Glossary

Custom Jacket Board admits all boards two square feet and over surface measure, yielding no less than 83.3% Clear One Face cuttings. The reverse side of the board will be Jacket Board #1 grade or better.

Wane is limited to 8.3% of the surface measure of the board on the best face. Wane may be divided, showing on both board edges.

The aggregate inches of pith length, will not exceed 2 times the surface feet of the board.

The aggregate inches of split length, will not exceed 2 times the surface feet of the board. Splits diverging more than 1" (25mm) per 12" (305mm) in length, are not admitted, except when 12" (305mm) or shorter and within one lineal foot from the end of the board, leaving at least 50% clear wood and not less than 25% sound wood in aggregate.

Side bend is limited to 0.5" (13mm). Pin knots are not considered a defect.