Return
to Cascade

Alder Jacket Board #1

Alder Jacket Board #1

JB1

Jacket Board #1 is a 66.6% Clear Two Face cuttings grade.

Jacket Board #1 is a better grade jacket board slotted below Custom Jacket Board but better than Jacket Board. It is meant to help customers that need a two sided clear cutting for production, although it can be used in almost any application.
Length Specs:
  • 6′ (1.83m) minimum
Width Specs:
  • 3″ to 4.5″ (76mm to 114mm)
Cutting Specs:
  • 3″ x 24″ (76mm x 610mm)
  • No limit to the number of cuttings allowed
6’1″ 7’1″ 8’1″ 10’1″ 12’1″
13/16
4/4
5/4
6/4
8/4
Notes:

Jacket Board #1 admits all boards two board feet and over surface measure, yielding no less than 66.6% Clear Two Face cuttings. Side bend is limited to 1″ (25mm). Pin knots are not considered defect.

Notes:

Jacket Board #1 admits all boards two board feet and over surface measure, yielding no less than 66.6% Clear Two Face cuttings. Side bend is limited to 1″ (25mm). Pin knots are not considered defect.

Virtual Unit Tour

Sample A

Front – Front Cuts – Back Face

Sample B

Front – Front Cuts – Back Face

Sample A

Front – Front Cuts – Back Face

Sample B

Front – Front Cuts – Back Face