Return
to Cascade

Alder Jacket Board

Alder Jacket Board

JB2

Jacket Board is a 50% Clear One Face cuttings grade.

Jacket Board is similar to a narrow custom shop or higher-end Common Shop grade. It’s well suited for cross cutting applications for use in panel and case good construction, maximizing sound back, Clear One Face cuttings.
Length Specs:
  • 6′ (1.83m) minimum
Width Specs:
  • 3″ to 4.5″ (76mm to 114mm) with widths up to 5.5″ (140mm) allowed
Cutting Specs:
  • 2″ x 24″ (51mm x 610mm)
  • No limit to the number of cuttings allowed
6’1″ 7’1″ 8’1″ 10’1″ 12’1″
13/16
4/4
5/4
6/4
8/4
Notes:

Jacket Board admits all boards two board feet and over surface measure, yielding no less than 50% Clear One Face cuttings. The reverse side of the cutting being a sound cutting. Side bend is limited to 1″ (25mm). Pin knots are not considered defect.

Notes:

Jacket Board admits all boards two board feet and over surface measure, yielding no less than 50% Clear One Face cuttings. The reverse side of the cutting being a sound cutting. Side bend is limited to 1″ (25mm). Pin knots are not considered defect.

Virtual Unit Tour

Sample A

Front – Front Cuts – Back Face

Sample B

Front – Front Cuts – Back Face

Sample A

Front – Front Cuts – Back Face

Sample B

Front – Front Cuts – Back Face