Return
to Cascade

Alder K Strip

Alder K Strip

KST

K Strip is an appearance grade with sound tight knots, yielding 83.3% Structurally Sound Cuttings.

K Strip is a top line, sound, structural grade. It is similar to a narrow Premium. It is often used for moldings, case good construction, panels, doors, cabinets, furniture, and where the wider premium board is not required.
Length Specs:
  • 84″ (2.13m) minimum
Width Specs:
  • 4 1/4″ to 4 3/4″ (108mm to 121mm)
Cutting Specs:
  • Minimum of one cutting 4 1/4″ to 4 3/4″ (108mm to 121mm) by 84″ (2.13m) sound cutting
6’1″ 7’1″ 8’1″ 10’1″ 12’1″
4/4
5/4
Notes:

The K Strip face knot size is limited to 1/2″ (13mm) unsound and 1″ (25mm) sound.

Each board will yield no less than 83.3% sound cuttings. The reverse side will be Frame grade or better.

Pencil wane is allowed on the K Strip product, and defined as 1/4″ (6mm) in depth by 1/4″ (6mm) in width.

Side bend is not allowed

Notes:

The K Strip face knot size is limited to 1/2″ (13mm) unsound and 1″ (25mm) sound.

Each board will yield no less than 83.3% sound cuttings. The reverse side will be Frame grade or better.

Pencil wane is allowed on the K Strip product, and defined as 1/4″ (6mm) in depth by 1/4″ (6mm) in width.

Side bend is not allowed

Virtual Unit Tour

Sample A

Front – Front Cuts – Back Face

Sample B

Front – Front Cuts – Back Face

Sample A

Front – Front Cuts – Back Face

Sample B

Front – Front Cuts – Back Face