Return
to Cascade

Lenga Cabinet

Lenga Cabinet

CAB

Cabinet is a 66.6% Clear Two Face cuttings grade.

Cabinet grade Lenga is a better quality grade which is graded for two face cuttings. It is best used in applications where both faces are seen like chair backs, cabinet doors, etc.
Length Specs:
  • 6′ (1.83m) minimum
Width Specs:
  • 4.5″ (114mm) minimum
  • With up to 5% narrows
Cutting Specs:
  • 3″ x 6′ (76mm x 1.83m), or 4″ x 3′ (101mm x 915mm)
  • No limit to the number of cuttings allowed
6’1″ 7’1″ 8’1″ 10’1″ 12’1″
13/16
4/4
5/4
6/4
8/4
10/4
12/4
Notes:

Cabinet admits all boards two board feet and over surface measure, yielding no less than 66.6% Clear Two Face cuttings.

Boards are graded from the poorer face.

SIDE BEND is limited to 1″ (25mm). PIN KNOTs are not considered defect.

Notes:

Cabinet admits all boards two board feet and over surface measure, yielding no less than 66.6% Clear Two Face cuttings.

Boards are graded from the poorer face.

SIDE BEND is limited to 1″ (25mm). PIN KNOTs are not considered defect.

Virtual Unit Tour

Sample A

Front – Front Cuts – Back Face

Sample A

Front – Front Cuts – Back Face